Customer Supports & Sells

にほんご 中文
Home > Capabilities > Surface Treatment > Powder Coating
Powder Coating and Painting Treatment
Powder coating and painting treatment services

Powder coating is divided into two types: Powder coating and painting. It is the most commonly used surface treatment for rapid prototype, precision parts and sheet metal. They can protect the surface from corrosion, rust, and aesthetics. Powder coating and painting can be customized with different textures (fine lines, rough lines, leather lines, etc.), different colors (red, blue, gold, green, gray, purple, natural, black), different gloss (mute Light, flat, high-light effect, if you need custom-made prototype-painted or low volume production, you can directly tell us the Pantone color card number or Raul color card number, you can also provide samples, we can customize the same Powder coating and paint effect according to the color card number or template, please contact us.

Powder coating treatment characteristics

Powder coating is also called spray plastics. The powder coating is sprayed onto the surface of the workpiece by electrostatic powder spraying equipment. Under the action of static electricity, the powder will be uniformly adsorbed on the surface of the workpiece, and then cured at a high temperature to form a protective coating. The mechanical strength of the powder is attached. The effect of anti-corrosion and anti-aging is very good, and the powder coating of powder spray does not contain solvent and meets environmental protection requirements. The powder is mostly used for surface treatment of metal products in industries such as protection, electrical edge, signal receiver, equipment casing and lighting.

Powder Coating and Painting Treatment Powder Coating and Painting Treatment
Paint treatment characteristics

Painting is a method of applying paint to the surface of a product by means of a spray gun by means of air pressure to disperse the paint into uniform and fine droplets. Paint can be divided into three types: bright light, flat light and matte. The paint coating has protective effect on the surface of the product, prolonging the life of the workpiece, followed by decorative, beautiful and pleasant, increasing the value of the product. The painting treatment is applied to metal, plastic and furniture. In the fields of automobiles, airplanes, ships, electronics, electrical appliances, medical equipment, machinery and equipment, ZhuanXin Precision can provide you with different painting effects according to your different needs. Contact us now.

Powder Coating and Painting Treatment Powder Coating and Painting Treatment
The difference between Powder coating and painting

>>The powder coating of powder spray does not contain any solvent, it is environmentally friendly and non-polluting, and the solvent contained in the spray paint.
>>The powder coating has a high utilization rate, the utilization rate of powder coating is about 95%, and the paint for painting can only be stored for a short time.
>> There are many kinds of paints, and the Powder coating category is relatively small.
>>The Powder coating is thicker than th painting, and the surface effect of the spray paint is smoother than that of the spray paint.

Why to choose ZhuanXin Precision make powder coating and painting?

The powder coating and painting process is welcomed by many R&D designers and engineers of prototype, low volume production parts and sheet metal parts. ZhuanXin Precision not only provides powder coating and painting treatment, but also provides: anodizing, iron fluoride Dragon spray, electroplating, passivation, polishing, sand blasting, wire drawing, silk screen printing, laser engraving, electrophoresis, CD pattern, etching, highlighting, etching, if your new product has surface treatment requirements, you can contact us, we can You provide a reference suggestion or a free sample.

Powder Coating and Painting Treatment Powder Coating and Painting Treatment

In addition to surface treatment, we are also very good at various processing techniques. We have more than 30 advanced processing equipments, which can customize your processing technology, such as: CNC milling, CNC lathe machining, wire cutting, EDM, laser Cutting, CNC bending, stamping, drilling, tapping and other processing, 1~10000 pieces of hand model and precision parts can be customized, 3-5 days global delivery, now send 3D/CAD files to us, within 2 hours Get a free quote

Get an Instant Quote