Points To Note When Using A Small Machining Center
Here is Online CNC Machining Service manufacturer talking about Points To Note When Using A Small Machining Center.
If you have any idea about Aluminium Cnc Machining, welcome to contact us and discuss.
A small machining center is a machining center in which the table and the spindle are placed in parallel. The small machining center usually has three linear motion axes plus one table rotary axis. The small machining center can automatically select different tools according to the program after clamping the workpiece at one time, automatically change the rotation speed of the spindle, and complete the processing of multiple processes on multiple surfaces in the order of programming. This kind of machining center is most suitable for processing the box type. Components. Next, the small series introduces the four main points of attention when using a small machining center.
First, the installation of a small processing center environment
Small machining centers should be installed away from sources, away from direct sunlight, without heat radiation and without moisture. If there is a source near the place where the small machining center is installed, a shockproof groove should be placed around the small machining center. If the anti-shock is not provided, it will directly affect the processing accuracy and stability of the small machining center. Over time, it will affect the poor contact of the electronic components, causing failure and affecting the reliability of the small machining center.
Second, the voltage and current are strictly controlled
Small machining centers are generally installed in the processing workshop, and the mechanical equipment of the processing workshop is numerous, which inevitably leads to large fluctuations in the power grid. Therefore, the location of the small machining center must strictly control the voltage and current of the power supply. It is necessary to control the voltage and current of the power supply within the allowable range of the small machining center. It is necessary to keep the voltage and current of the power supply stable, otherwise, it will directly affect the small machining center. The normal work.